DTF Pressing Instructions

***Please note that an actual heat press is necessary to properly press these prints. If you choose to use an alternative option, such as a Cricut heat press or an iron, you do so at your own risk.

DTF Pressing Instructions:

  1. Pre-press your shirt for 5-7 seconds to remove any moisture.
  2. Press at 305-325 degrees for 10-12 seconds with high pressure. For glitter DTF, press at 350 degrees for 30 seconds.
  3. Set aside to cool and peel once cool to the touch. 
  4. Press again at 305-330 degrees for 10-12 seconds, with a teflon sheet or parchment paper covering the design for protection. You may peel immediately. 
  5. Allow 24 hours before washing/drying.

Feel free to reach out if you have any questions at all.